Call nowFree estimate
Design inspiration of large-format light tile flooring opening toward a kitchen
Precise surfaces

Tile Installation

Ceramic and porcelain for floors and wet walls, laid out so the cuts, the slope, and the grout are decided before the mortar starts.

Completed projects include a 1-year warranty that starts at project completion.

Design inspiration, not a completed JRF project

Tile

Ceramic, porcelain, and the pieces that finish the edge

Tile is a clay or porcelain body, glazed or through-color, set in mortar on a prepared substrate. The tile is the part you see. The substrate and the joints decide whether a wet room lasts.

CeramicOften the right body for walls, decorative fields, and some lighter floors. A wall tile is not automatically a floor tile. The rating has to say it can be walked on.
PorcelainDenser, and the usual choice for floors, showers, and kitchens that take real traffic. Large-format porcelain needs a flat substrate or the edges lip.
Mosaics and trimA shower floor is often a smaller mosaic because it can follow the slope to the drain. Bullnose, pencil liner, and metal edges are how a field stops cleanly.
Stone and stone-lookReal marble and travertine need sealing and will etch. A porcelain that looks like stone gives the pattern without that etching. We will not call one the other.
Good fits

Wet rooms, entries, and floors that stay put

Tile is the surface that can be cleaned hard, as long as the assembly under it was built for water or for the traffic.

Showers and tub surroundsTile belongs here when the waterproofing is behind it. The glaze is not the waterproofing.
Bath and kitchen floorsA floor that will not swell if the sink leaks, provided the subfloor under it is sound and flat enough for the tile size.
Entries and commercial floorsGrit and rolling traffic want a tile rated for them. A glossy wall tile on a store floor will scratch and show every footprint.
Feature wallsA fireplace face or a backsplash can be tile without the whole room becoming tile. The edge where it stops has to be a finished edge.
Install

Layout first, then mortar, then grout

A joint that is out of square at the tub is still out of square at the ceiling. Tile does not forgive a bad start.

SubstrateCement board or a proper membrane on the floor, and a waterproofed wall in any wet area. Drywall behind shower tile is how showers fail. We do not set tile on a surface that cannot take it.
LayoutCenterlines, the focal wall, and the cuts against a vanity or a glass panel are decided first. A sliver at the edge of a large tile looks like a mistake because it is one.
SettingMortar coverage matters more on large tile. Edges should meet without a lip you can feel barefoot.
Grout and cureJoint width is both a look and a maintenance choice. The shower stays dry until the grout has had its time. Then we walk it with you.
Care

The grout is the maintenance

Glazed porcelain is the easy part. The joints, the stone if you chose stone, and the movement under the floor are the rest.

CleanersA neutral cleaner. Vinegar and other acids etch cement grout and some stones. Porcelain shrugs off more, which is why it ends up on so many floors.
GroutCement grout can be sealed and will still darken in a shower that never quite dries. Epoxy grout resists stains and is a different install. The grout should match how the room is cleaned.
CracksA cracked tile is often a movement crack in the floor under it. Replacing the clay without looking at the crack sends the next tile the same way.
Real stoneMarble needs different care than glazed porcelain. Lemon and hard water will mark it. If you chose stone, that is part of the handoff.
Tile questions

Before a single box is ordered

Layout and substrate take longer to talk through than the color.

Do you tile showers, or only floors?+

Both. A shower is waterproofing, slope, the curb or the linear drain, the niche, and then the tile. A floor is flatness, movement joints, and grout. They are different assemblies.

What has to be true before large-format tile goes down?+

The floor has to be flat within the tolerance of that tile. A typical wood subfloor in an older Atlanta house is not that flat until someone makes it flat. Skipping that step is how you feel every edge with your feet.

Can you match tile from a 1990s bath?+

Rarely the exact run. We can often find a field that sits quietly next to what is left, or we redo the visible area so you are not looking at a patch. We will tell you which one it is before demolition.

Who handles the glass and the plumbing?+

JRF coordinates the tile and the finish surfaces. Plumbing moves and shower glass are called out in the scope so they are scheduled. If those trades are yours, that has to be decided before the layout is set.

Show us the wet room or the floor.

Tile goes well when the substrate and the layout are settled before the material arrives.

Completed projects include a 1-year warranty that starts at project completion.

Request a free estimate